TMPGEnc 4.0 XPress v4.7.8.309

TMPGEnc 4.0 XPress Version 4.7.8.309 - September 15, 2010
Added AAC 5.1 support in the MP4 file reader.
% P: V' k; X7 x, p7 D+ B; tFixed MP4/AVCHD file reader updated. This update corrects an issue where some video data would not be decoded unless played frame by frame.
- w& I8 I6 ^7 h9 k7 EFixed AVI file reader updated. This update corrects an issue where AVI files having a partially invalid header could not be opened.
( y8 M+ q3 |$ AFixed 44.1 kHz Dolby Digital audio files would not be correctly decoded.
Fixed Multiple WTV files imported through the Source Wizard would not open correctly.
Fixed Improved the file MPEG-1/2 file importaion when the VBV buffer size value is smaller than what is expected from the file characteristics, but is still within the limits.
Fixed Other minor fixes
& Y' D7 ^# A% r) ?% c3 {
$ |" J5 j5 L& q, Y& v- i! {! }
TMPGEnc 4.0 XPress Version 4.7.7.307 - June 16, 2010
3 n" ^' B. }$ c+ Q5 l; R, s0 OAdded CUDA - CUDA 3.0 support. (There is no functional difference in TMPGEnc 4.0 XPress when using CUDA 2.3 or 3.0).
This addition corrects the impossibility to launch TMPGEnc 4.0 XPress when a NVIDIA® GeForce GTX400 series video card (with a Fermi architecture graphic chip) is present.
7 u( m, @, K2 B: I*CUDA 3.0 support is available only for the GeForce GTX400 series video card. *Accessing the GeForce GTX400 series video card CUDA function requires the NVIDIA graphic driver ver. 197.13 or newer version.
Fixed AVCHD file reader updated. Some data would cause the continuous display of the same picture.
Fixed MPEG file reader updated, allowing the correction of the issues listed below.:

1 p$ z) y( B. q) {2 R; W* TS files containing abnormal packets would be processed as normal packets, causing an error during the importation;
* Some TS files would be mistakenly recognized as a PS file;
* Linear PCM at 192 kHz would not be correctly processed.

& H; ?7 U! e' }5 ?1 sFixed FLV file reader updated.
2 X' D, v2 e$ {Fixed Conversion to PS of some WTV files containing AAC audio would suddenly come to a stop.
Fixed DVD-Video with a VOB containing a lot of useless data would not be correctly imported.
: P/ w# G7 u$ ?6 J: d2 u, FFixed When importing DVD-Video content through the DVD reader, if a problem occurs in a title, only this title is discarded instead of the whole DVD-Video.
Fixed Some transitions would not generate the proper effect.
Improved Some JPEG data would be imported with added noise.
5 E( m, _7 I4 S6 W( M8 a: p5 jFixed Other minor fixes
% B/ v- \! v6 s. Q
- E4 q: G* Q' B% q% B
TMPGEnc 4.0 XPress Version 4.7.6.304 - March 31, 2010
' e* ^' ~$ m" u* s  R. vAdded CUDA - CUDA 2.3 support.
: b" o- w3 j  rAccess to the CUDA function requires you update your graphic driver to version 190.38 or newer from NVIDIA. If you use a previous version, you will not be able to access CUDA.
1 ^9 q$ X+ o5 s3 B1 g" NAdded MPEG-2 + AAC WTV file support (The audio part of a WTV file converted into a MPEG-2 PS file by the Source Wizard may not play correctly in Windows Media Player).
/ x8 Q1 \( z: c9 j5 G5 N: LImproved Updated the MP4/AVCHD file reader. This new version:
5 z; F8 c# u9 p
* Allows the reading of some files that could not be imported before.
! H6 V  ^9 k" W* e* Fixes a doubled playback speed issue.
* Fixes a pink video noise appearing in certain configurations.
4 z& t* q2 U2 x! J. Y; O1 c* O3 R* Fixes a bold stripe pattern noise appearing in certain configurations.

, b1 E, m2 U' T4 \. G8 vImproved Improved memory usage for when the memory is too low, "Insufficient memory," "Invalid sample format," or other errors would display. Because of this improvement:
  ?  h" J. k5 p  p9 U: p
- f3 k$ r! G; Y# O4 |* A* Memory usage has been dramatically lowered when setting the output mode to "Output all clips into one file (or set of files)".
; s) [/ d. I: U; K6 {6 T* The negative affects of large memory address space usage are limited, especially in Windows XP.
* Memory usage has been lowered when registering a large amount of keyframes in a project.
' r; w% o7 T4 z0 X) N* Limits the usage of the file importation cache when the host computer contains a large memory.
) j. _# b8 q" {
% ^# |( f; V' I5 rImproved The MPEG file reader can now import a PTS data-only MPEG file.
. [' E: C& A, _" v$ g6 W/ h- J4 AImproved The Dolby Digital decoder continues outputting audio even after encountering corrupted data.
Improved Some specific chapter thumbnail pictures from certain DVD-Video data could not be imported.
3 C, z" p! Q1 N; V: VImproved Using NearestNeighbor or BiLinear to dramatically (50x) increase the picture size could rise an error.
Improved Drag and dropping a WTV file in the Source list now automatically displays the Source Wizard.
Fixed In certain configurations, the Preview buttons of the cut-edit window would not display correctly and the audio waveform would display a "No audio available" message.
Fixed In certain configurations, an error would appear at the end of a Windows Media Video output when the "Output keyframe as marker" option is enabled.
( w2 E6 H% X+ h& c4 TFixed Some capture cards' data could not be correctly converted when converting a WTV file into MPEG-2 PS.
Fixed AVI 1.0 format outputted DivX file would not play correctly with the default Windows 7 decoder.
! k' ?9 y+ F$ {Fixed Changes to the audio noise reduction filter would not be correctly be taken into account after a preview.
+ M" X# T. C  V$ L/ OFixed Freezes would occur when applying a filter template containing audio noise reduction or audio fade-in/out to an audio-less clip.
Fixed In the batch encoder tool Project editor, leaving the Output file/folder information blank would prevent any reference or cancellation.
Fixed Other minor fixes
( s! o: ]# }" n; i

( e7 u; B( n; C( ?TMPGEnc 4.0 XPress Version 4.7.4.299 - January 11, 2010
Added AAC 5.1 ch (6 channels) import support. (Importation of an MPEG-2 TS file containing an AAC stream up to 5.1 channels is now possible.)
In addition, when importing an AAC stream you can manually set the number of channels in the "Clip properties" stage of the "Clip editor" window.
Added Multistream selector function in the MPEG file reader.
, q+ X) m) C+ X# G4 g$ zYou now have the possibility to select a specific video and audio stream when the MPEG-1/2 source file contains several video and audio streams.
Added Support of the Microsoft TV recorder file format "WTV".
9 z- x$ _4 k# U, ]2 y9 l5 M(WTV file importation is possible on the computer that recorded the file, or can create such files, and are not copy-protected.)
# K( F  H) j+ j# f2 ^' bImproved MP4/AVCHD File Reader updated.
Should allow the importation of files that could not be previously imported, and solve the playback speed issue.
# J1 |( O) ~7 F2 F) F' Q3 \Improved YUV color space information contained in the source file is now taken in account when imported through the MP4/AVCHD File Reader. If no color space information is available, the BT.709 or SMPTE 170M color space is automatically selected according to the pixel rate.
3 L" ]7 J% Y6 _' b9 D3 v+ zImproved When outputting an MPEG-4 file, the YUV color space is selected according to the resolution and framerate, the color space is then converted to the selection before the encoding stage.
Improved When the Batch encode tool fails to retreive the automatically saved batch list it now displays an error message, erases the batch list and resets.
: S5 B. @2 [/ j$ b, U; V/ J+ ?- VImproved Following a silence, the audio uniformization filter could highly increase the volume, resulting in an explosion-like effect. The improved filter reduces the occurence of such an issue.
Fixed An audio gap would appear when continuing to import a file through the DirectShow reader without seeking it.
; i" D6 R* }  L. TFixed The DirectShow Reader audio management has been adjusted, allowing the DivX Reader to correctly get the audio.
9 z0 Z9 W5 E/ @8 ?Fixed AAC decoding now resumes instead of stopping after some corrupted data has been encountered.
: P: a6 S- d$ c; e$ v6 o  ZFixed Some flawed header or trailer MPEG files are now importable through the MPEG File Reader.
Fixed The Windows Media Audio file output does not allow the registration of unexpected file extensions anymore.
Fixed The DivX file output basic mode would always set the level to Medium even when Low or High was selected.
Fixed In the DivX file output, reducing the profile would display a wrong framerate in the window.
Fixed In the DivX file output, it was possible to select a non-standard MP3 bitrate.
& n' H0 O( n2 HFixed The Batch encode tool would sometimes display an error message when started, and not display it when restarted.
' n. J  D7 C4 N3 _7 l) RFixed The WAVE file output advanced mode would note .1 ch even when no .1 ch was selected.
Fixed The Smart sharpness filter picture edge processing is stricter, reducing the occurence of possible problems.
4 l3 r$ G9 a2 n" rFixed The seek bar motion is now smoother in the Preview display window, or when disabling the thumbnail display in the Clip cut-edit window.
Fixed Other minor fixes.
* W# w4 {( d5 {4 {. w
4 j( Z9 h, b( o( q( P! K4 M  Y5 d
7 ~) ?) a. y2 \+ P# qTMPGEnc 4.0 XPress Version 4.7.3.292 - August 18, 2009
Added DivX® encoder/decoder updated to the latest version.
Added DivX® file output support extended to 1080p.
& S  q7 j/ }9 P/ Q! F) nAdded DivX® output offers an AVI container type selection. (1080p profile is AVI-2 container type only). Because of this addition, the "Partition" tab is renamed as "File" tab.
Added DivX® file output maximum bitrate is updated to support the new profile specifications (The GMC option is available when the profile is set to "none" and the resolution is no greater than 1024x768).
Improved Audio seek processing for DirectShow filter type source.
7 ~+ X, c$ I3 j& u9 gImproved Memory usage for the time-based noise filter is reduced.
Improved Output stage: output start, batch registration and preview can be activated through keyboard shortcuts:
Encode start/stop = CTRL + Shift + S
, \% ?  h6 N: V1 a1 u0 YBatch registration = CTRL + Shift + B
Preview = CTRL + Shift + P
" O- v6 U* b# s9 o3 V! W4 WImproved The MPEG-4 AVC file output bitrate control mode 2 pass Constant bitrate is removed. (Project or output setting template containing the 2 pass Constant bitrate option is automatically ajusted to 1 pass Constant bitrate.)
0 f2 g5 E- Q; z5 Q, s- J8 lImproved The MPEG-4 ISO file output has Maximum bitrate, VBV buffer and Quarter pixel options added, allowing improvement of the picture quality. Some settings of the "Video" tab are now in the "ISO" tab.
* |3 z% A5 ^# a2 d. N  m+ ]Improved DivX file output "File" tab displays a warning that used to appear when moving from the Format stage to the "Output" stage.
Fixed Some MPEG-2 TS file could not be imported correctly.
4 B  @* ^# [! ^  G" i8 nFixed Some outputted non-standard DVD-Video or DVD-Video header containing garbage data could not be imported correctly.
2 `3 U0 G5 C; q& `Fixed Some out of standard MPEG-4 files could not be imported correctly.
Fixed Some filter processes could raise an exception and instead of correctly displaying an error would stop the encode process.
Fixed AVCHD files generated by a camcorder would not be imported entirely.
Fixed An insufficient memory error would occur when encoding the biggest WMV clip registered in the Source stage.
Fixed Using the Smart Sharpness filter in CUDA mode would sometimes slow down the processing speed.
Fixed Sometimes when starting a batch output in the Batch encode tool, an output setting importation error would arise, and the output would start with different settings.
Fixed Launching the Batch encode tool would display an error that would not appear after restarting the Batch encode tool.
Fixed When using CUDA, the GeForce driver version check would only retreive the display driver version.
Fixed When using CUDA, an invalid process could arise with the Contour filter.
- P$ }9 c; S6 f9 w, }& |Fixed When using CUDA, setting a positive value in the Audio gap correction would prevent the audio from playing in the clip header during a preview.
Fixed Other minor fixes.
SpursEngine* File Output
8 T% R+ y# |: R5 u% B- i- }' eAdded "Tighten up bitrate limit" option added. This option allows you to control the SpursEngine bitrate overflow. (Previous versions had this option always enabled).
4 G9 u% N% Y" D: ]Added The MPEG-4 AVC output VBV buffer size maximum value is increased frmo 2047 KB to 4094 KB.
Fixed During the SpursEngine plug-in device check, the SpursEngine board could not be correctly recognized when the drivers were not installed.
Fixed The VBR output would sometimes not function properly. This correction improves the picture quality. (Please install the latest version of the TMPGEnc Movie Plug-in SpursEngine).


TMPGEnc 4.0 XPress Version 4.7.1.284 - April 27, 2009
Added Support for the TMPGEnc Movie Plug-in SpursEngine.
Fixed Some specific MPEG-2 TS data (AVCHD data) would be be processed incorrectly.
Fixed Some specific MPEG-4 file would be be processed incorrectly.
- W4 D) ]- k+ Y" R. Q) A8 ^Fixed Some specific audio data would not be correctly decoded by the AAC decoder and resulted in complete absence of audio.
Fixed MPEG-4 file output would sometimes be incorrect in interlace mode.
Fixed The picture would become green during an output using CUDA. If this problem occurs again an error arises.
1 R4 \5 w6 V1 B! m7 DFixed Some MPEG files could not be read anymore.
Fixed In some cases, when multiplexing a MPEG-1 System stream or MPEG-2 Program stream, the PTS would not be placed in the adequate PES.
$ h4 }: \/ m/ j0 ~% t( z) UFixed The framerate selector display would become invalid when selecting the "Playback 3:2 pulldown" option in the MPEG output settings.
" \# o/ q% `: d8 _9 G& O, [Fixed Other minor corrections.
Changed CIF resolution selection can no longer be selected in the SpursEngine file output when automatic resolution setting is active for the Super resolution processing.
Changed CUDA - CUDA can now be enabled even when the driver version cannot be retreived from certain CUDA supporting video cards with usable CUDA. (Since the driver version can still not be retreived, problems may occur depending on the driver version used. When using CUDA, we recommend you always install the latest version of the driver available from the NVIDIA corporate website.)

2 V* l: x3 D1 |4 C) k6 \
3 e% D1 g6 p6 q, Z' sTMPGEnc 4.0 XPress Version 4.6.3.268 - December 4, 2008
Fixed CUDA - CUDA usage would not display when at 0%.
Fixed CUDA - A color error would appear when using the video noise filter.
, ^1 ?' ^* @8 y# ^* Z8 m/ ]$ ^Fixed CUDA - "Simple duplication on stripes only" and "Inverse pulldown (reinforced anti-stripes)" deinterlace mode would not function properly.
Fixed When used in a Core i7 environment, the determination of the number of CPUs would become invalid.
/ L2 V: {6 A5 q& p: m; T( ^( d$ KFixed An error would arise when rotating a picture in the Slideshow editor.

; Y# Y) ]6 V% f8 i9 {2 Y  U7 u  j
0 ^2 e/ g, _! @+ f# v4 ATMPGEnc 4.0 XPress Version 4.6.3.267 - November 19, 2008
+ [- C+ V8 B/ @# C6 ?! ~* `Fixed CUDA - The deinterlace filter in Inverse pulldown mode did not yield a correct result when used with CUDA.
* ^$ b+ L- K! w* q9 J' R# {Fixed CUDA - The video Noise reduction/Noise reduction (time) filters would sometimes generate horizontal stripes when used with CUDA.
Fixed CUDA - An error would arise when using the Crop filter if the target picture width was below 8 pixels when used with CUDA.
Fixed CUDA - The resize filter in bilinear mode would not yield a correct result when used with CUDA.
Fixed CUDA - The deinterlace filter in "Replication - simple mode" did not yield a correct result when used with CUDA.
! V- g+ K' Z7 A) BFixed Output settings would sometimes not be correctly reflected in Windows Media Video output.
Fixed A temporary folder was created in random locations such as the desktop and an error would arise during a MPEG-4 2 pass output.
Fixed Using the video fade-in/out filter would slow down the output time.
0 z5 Q* F3 v1 H2 k# G* eFixed Modifying the aspect ratio in the Clip properties would not be taken in account at the output stage when using the PV3 file reader.
! I, \) S# Y9 P# s7 _( h, W' j+ DFixed An error would occur and the preview would be black when importing an AviSynth's AVS file.
5 A6 N3 U4 \2 ^( \

5 c+ A2 y: A: m7 H# L4 T  I8 KTMPGEnc 4.0 XPress Version 4.6.2.266 - October 29, 2008
, k( ^2 u* |4 z( Y" vAdded NVIDIA CUDA 2.0 support. Can be used with filters and the MPEG-1/2 decoder. CUDA-capable graphics card required. For more information on CUDA, CUDA supported video cards, and downloading the latest drivers, please see NVIDIA's website.
1 C6 g+ `8 f9 F: I2 H3 x) @! nFixed For AVI codec output quality, keyframe interval and bitrate would not function properly.
6 Z6 I) s# i( g- U4 U. `Fixed Deadlock could occur when using the VFAPI file reader.
Fixed Green blocknoise could sometimes appear when importing a MPEG-2 PS file through the MPEG file reader.
( B6 t, Y& m) WFixed Some MPEG file aspect ratios could not be properly determined.
Fixed Imported AAC audio would be delayed by several milliseconds.
# b, e$ {, ~7 `5 l5 _# YFixed MPEG-2 TS file importation would fail when the stream header contains garbled data.
Fixed An error would occur during the output when joining several clips with different YUV colorspace.
9 H! V/ b- S5 f' v  }0 eFixed The MPEG tool would output a LPCM file with a *.tlp extension when demultiplexing.
Fixed Other minor issues have been fixed.
1 H( r5 o7 Q- |$ k
1 w  E. P* E! f
TMPGEnc 4.0 XPress Version 4.5.2.255 - August 11, 2008
Fixed Sequential picture output in JPEG format has been reversed to the YUV colorspace.
Fixed Navigation in the second half of an AVCHD clip would not work properly.
* y. m+ O! w8 p8 uFixed Processing of pictures with subtitles added would sometimes become invalid.
6 ^$ c) P7 I4 T* ]Fixed When outputting in sequential pictures, certain types of sources would sometimes result in an invalid sample format error.
Fixed Some players would create noises when playing an audio file outputted in MP3 joint-stereo mode.
* K; _9 C) R/ `# N# W3 s

/ [' C* H* b% t: O( ZTMPGEnc 4.0 XPress Version 4.5.1.254 - June 26, 2008
& D$ G, i7 S3 K; G  ^, JNew Includes a Blu-ray (BDMV, BDAV) MPEG-2 output template.
New Includes an AVCHD reader allowing the use of AVCHD sources from a camcorder.
New Can use the Sony AVCHD reader when installed on the application host computer.
) |6 J8 @8 ^1 B8 Z2 j" kImproved Supports full HD output (up to 1920×1080 @ 60 fps) in MPEG-4 AVC/H.264.
Improved Supports pixel aspect ratios other than 1:1 output in MPEG-4 AVC/H.264.
/ z5 v  A4 A* a5 H& IImproved Supports AAC audio (up to 2 channels) input through the MPEG reader. Also supports AAC audio input embedded within an MPEG-2 Transport Stream container.
Improved MPEG file output's Display mode setting offers Progressive (2:2 pulldown) option.
, f+ O/ E3 E9 C) t" _( OImproved Implemented a solution to correct a loss of CPU usage rate increase occuring when outputting more than one file in WMV format within a Windows Media Player 11 environment.
Improved Supports the WMF picture file format through an embeded WMF decoder.
+ P- t: }& J5 n4 Z0 F* @* kFixed Validation system updated to support content-regulated network environment.
) ~, c. d' o- c' f& i8 B: C; T( kFixed An address violation error and possible application freeze occuring during the output when the source files are imported through the DirectShow reader.
Fixed Application would sometimes not respond when converting a DVR-MS file into a Program Stream.
Fixed FLV1 file would not import properly with some specific CPU environments.
Fixed Project file handling would not be done properly when opening a project file with the "Open a project file" option and manually point the source files not found in the Project.
Fixed An error would arise when starting the editing of a specific mp4 file imported through the QuickTime reader.
Fixed The source framerate could not be obtained properly for a file imported through the QuickTime reader.
Fixed 60 fps data could not be represented properly for a file imported through the QuickTime reader.
% b) x3 i6 M& [) z; A, sFixed Some parameters were not correctly reflected in the MPEG-4 AVC/H.264 output window.
Fixed Limitations of the Level 2.1 parameters were incorrect in the MPEG-4 AVC/H.264 output window.
3 \+ L( ?" G4 u& e& l0 qFixed The timestamp correction in the MPEG reader would not function properly.
Fixed The VBV buffer size would be always lower than the maximum when outputting in HDV-HD1 with standard definition.
6 `6 V1 k4 t3 e1 \Fixed Noise could appear when applying the Time tone reduction filter on a monaural audio stream.
Fixed LPCM data information would not be handled properly in an LPCM source imported through the AVI reader when the quantization was different than 16 bit.
Fixed Encoding would sometimes become abnormaly slow when using the Dolby Digital encoder.
1 ]. \/ w# y2 `  W+ h2 z* i/ \Changed Interlace display mode is no longer selectable in the MPEG-4 AVC/H.264 output settings window when in Baseline profile.
Changed MPEG-2 AAC audio format is no longer selectable in the MPEG-4 AVC/H.264 and ISO output audio settings window.
, a9 |' a! b, YChanged The bitrate default value is automatically calculated based on the framerate, resolution, etc. in the MPEG-4 AVC/H.264 output settings window.
Changed Bitrate buffer size setting has an Automatic option in the MPEG-4 AVC/H.264 output settings window.
Changed Bitrate buffer size setting in kbits instead of bytes in the MPEG-4 AVC/H.264 output settings window.
4 G; G8 R5 D  b/ |9 r4 ~1 f6 J4 G4 fChanged "Other" tab displayed in the MPEG-4 AVC/H.264 output settings window.
Changed File size and Authoring file size are now displayed in the format setting window when using the DVD, XDVD and BD templates.
! R6 D/ C. p* A1 T2 YChanged BD (25, 50 GB) file size added to the bitrate calculator media type parameter.
Changed File size and Authoring size added to the MPEG Encode/bitrate settings calculator when in DVD, XDVD or BD template output mode.
Changed The Average video bitrate display becomes blue when equal to the Minimum bitrate in the MPEG Encode/bitrate settings calculator.
Changed Calculates the overhead in the MPEG Encode/bitrate settings calculator when in MPEG-2 Transport Stream multiplexing mode.
# Z8 ~3 x- p. W5 `2 B2 {+ \8 HChanged The "Update batch list file..." and "Save the batch list..." options in the Batch encoder preferences are enabled by default.
. X9 x: i4 z+ m$ o4 WChanged "Delete the batch list when completed without error" option added to the Batch encoder preferences.
" s  w; I1 l/ f2 E4 a$ YChanged Colorspace can be set for each codec in the Preferences' AVI settings panel.
$ m5 q3 Q& T, T
) i, T; o7 o5 G; x$ i) M
TMPGEnc 4.0 XPress Version 4.4.2.238 - January 24, 2008
* @# R$ Q) n" S- C! kFixed Subtitle SRT file importation could fail when the last line was not empty.
- O/ x+ @7 A- o* [! pFixed Subtitle SRT file importer now keeps the imported data up to the point where an error occured instead of discarding the whole data.
- x- k0 S  I% BFixed When outputting in 1 clip = 1 file mode, the clip number would not display correctly.
( M# V2 m& f4 L4 F$ L. ?6 q6 W
$ s" i) N  l+ {' ]6 p! `
# N* ?6 g; t4 N0 |5 p, i* l; UTMPGEnc 4.0 XPress Version 4.4.1.237 - December 18, 2007
Fixed Noise appearing when using a QuickTime source file.
. G  h9 M+ f, I
Fixed Picture distortion appearing during fast playback of a QuickTime sourcefile.

1 i+ w; T( g# X  T7 @. IFixed An error could appear when outputting in H.264 through QuickTime 7.3.
4 W4 W( E8 ]& v# A3 Q2 F
9 i- v* f$ L* z& r0 @: l( ?0 uFixed Enabling Deinterlace by default could considerably slow the output under specific conditions.

, r+ I' u) |9 j* \1 }# mFixed Memory usage could become too high when processing a large number of projects in the Batch Encode Tool.
5 |( z' j5 U8 _6 _) z( q9 W+ E
Fixed Inconsistencies could appear when using an AVI/Wave audio file in μ-law format.

5 I' B; {/ U" U( ]  Z
8 t0 b) d  v% w' x, N$ `9 D. `TMPGEnc 4.0 XPress Version 4.4.0.234 - November 12, 2007
Added Optimized for Intel's Core™2 Extreme QX9650 processor and Xeon 5400 family of processors.
Added SSE4 routines optimization.
Added New text align option in the subtitle layout editor.
Fixed An Invalid Index error could occur in the Slideshow editor after adding a clip.
/ k- ]* f% O' ~Fixed Freeze could occur at new clip creation when adding more than 200 pictures in the slideshow.
# ?/ U: A5 H+ }Fixed Clip reference could be lost during a picture addition in the slideshow, preventing a clip from being accessed for editing.
Fixed Help link corrected within the application.
  [" X$ M! T# z, UFixed Some specific QuickTime file format's framerate could not be retreived.
- n1 `7 r& t; a  J* uFixed Cancelled clip importation from a project would not be removed from a project when such clip could not be found at project loading.
2 [( o, m! T4 k) Q" f: LFixed In HDV output mode, 1720x480/29.97 fps output setting would in fact outputs at 59.94 fps, resulting in an error.
Fixed 4096 bytes of data could disappear during the MPEG tool output.
0 `& R' c2 C1 H5 I( q3 {" c4 IFixed Non-outputted project's thumbnail in the batch encode tool would not update when resizing the tool window.
( X5 M  P7 L2 N7 Y4 d; ~: DFixed Could not open wave files bigger than 2 GB.
- M, @& A8 W* D$ y5 }, oFixed When erasing a layout in the subtitle editor, subtitles using a higher ID number would become invalid.


TMPGEnc 4.0 XPress Version 4.3.1.222 - July 12, 2007
  ^0 M9 |6 ?. p5 i/ G* N" Q7 GFixed MPEG-4 output could produce an invalid file.
/ X3 a2 C# r1 zFixed Including Author and Copyright information in the AVI output could create an unplayable file.
Fixed Using the Time signal reduction filter could cause an application hang-up during playback or output.
- i( `* f+ t5 C2 `. M% jFixed Importing a QuickTime file could cause an application hang-up during framerate analysis.
$ x$ ]. K" w# F5 fFixed Setting a fade-out duration longer than the source file duration could disable the filter.
7 u- S" _" R8 rFixed Displaying the audio waveform with video that is less than 1 fps could cause a memory access error.

6 i4 r  M! w: h: W* |4 h5 i
1 |% B7 J' m3 Y9 X( R$ u8 }, BTMPGEnc 4.0 XPress Version 4.3.0.220 - June 27, 2007
6 F6 x# g* U" i9 s1 SNew Flash video (FLV1, FLV4) source file format support.
- J8 e$ x4 K% T9 k! UNew Displays the picture properties for AVI sources.
Improved 2D/3D Noise reduction filter process speeded-up through multithreading.
3 N1 O) ~6 y3 \4 U- M- D) ]9 k" S* NImproved MPEG Video decoding.
( V. e' u( N) R. T  E  eImproved YUY2 video format resize.
Improved PNG file handling.
Improved QuickTime reader multitrack downscaling to stereo (requires QuickTime 7.1).
6 P2 v/ K: A8 U- V9 X+ y: K7 A# U% aImproved QuickTime reader multichannel audio handling (requires QuickTime 7.1).
3 X! J4 y% V3 ], p* tFixed Multiple source file importation through DirectShow could cause a memory error.
Fixed Minor fixes.
" H) c7 [1 s; V0 Q( Q3 C6 }

TMPGEnc 4.0 XPress Version 4.2.10.211 - February 22 2007
1 m0 u# G! `8 L# ]  u4 P( SNew Windows Vista compatibility.


8 I% _/ Z* C. KTMPGEnc 4.0 XPress Version 4.2.3.193 - October 18 2006
New Windows Media Player 11 Beta and Windows Media Video 9 Advanced Profile support.
New You are now able to select the display or source size in the Output preview window.
5 K/ h% s2 u( A3 n. R' T1 P: MNew PV3 HD capture card format is now supported through the PV3 Reader. (Requires the AviUtl plug-in EARTH SOFT DV.aui Ver 2.4.4)
Updated The maximum number of B Pictures is now limited to 3 in the Main profile, following the MPEG-4 AVC specifications.
Fixed You can no longer choose an unauthorized framerate for a specified DivX output profile.
+ k& a. t4 J# t( fFixed An error where the aspect ratio of a 4:3 740x480 WMV source displayed as Other (xx) instead of 4:3 has been fixed.
2 j4 b  @( ^' |' n' J. IFixed In the subtitles filter editor, an error which occured when pressing the space bar while no text is selected has been fixed.
7 Y! Y' ~( B2 w) a6 RFixed An error which occured when starting the Batch encode tool if QuickTime 7.1.3 is installed has been fixed.
# e% S6 a  W3 xFixed The appearance of the "An error occured while structuring the clip edit window" warning has been fixed.
+ N# Z% Y6 F$ j5 uFixed An error where the deinterlace filter in "Replication - simple" and "Replication - animation" mode inverts the lowest field has been fixed.
' \; `3 L9 t( d( uFixed An error which may have occured during a picture resize has been fixed, and the the amount of memory used has been reduced.
8 f3 Q  ]# z) D! t0 y" ?% [Fixed Depending the display size, the Overlay display mode added a black line around the picture; this has been fixed.
Fixed Outputting a 16:9 source in PNG or JPG sequential pictures with the keep aspect ratio enabled displayed white top and bottom bars instead of black; this has been fixed.
Fixed Abnormal terminations which may have occured when opening a DVR-MS file with the DirectShow file reader have been fixed.
" r" G; _1 h% ]3 a, d& d$ W$ |Fixed Outputting a resized DivX or MP4 while keeping the aspect ratio may have resulted in an abnormal aspect ratio and black framing; this has been fixed.
$ p% Q# w, Y- J9 p  G7 EFixed Using the DivX reader resulted in false aspect ratio values, framerate values, etc. displaying in the Clip properties window; this has been fixed.
: O( C; C* B% w& F4 [; _* j+ _" AFixed MPEG-2A720x480 2.21:1 in the Clip properties window are now correctly recognized.
% T7 y7 I1 [" D, |- VFixed DivX file output format non-standard parameters fixes:
/ D$ ^4 w1 V! F- D--Non-compliant HDTV profile macroblock maximum limit in interlaced and progressive mode has been corrected;
8 D. d. D1 n  k1 m2 ]4 n--It is now possible to select an other aspect ratio than 1:1 in Home theatre profile;
--It is now possible to select the bidirectionnal encoding (B frame output) when using a profile with interlaced mode video type;
: L0 f# b' c  f) m- M3 o% ]- b9 N--It is now possible to select GMC/Quarterpixel search when using a profile;
--You can no longer select a non-compliant audio bitrate;
) C) _) k- [1 T0 C  j+ G--A problem with some of the standard audio bitrate value selection has been fixed.
Fixed Miscellaneous fixes.
% ?1 Z* ~  n+ X( u% M

; b. k8 V7 r: s3 Z# ]( G: ~TMPGEnc 4.0 XPress Version 4.2.3.193 - September 27 2006
- y5 R1 e2 c) [; h' o/ H9 |3 I8 @New Windows Media Player 11 Beta and Windows Media Video 9 Advanced Profile support.
' F' o+ v0 H" N- X/ K
New You are now able to select the display or source size in the Output preview window.
+ J% I  j. G. i# K# m$ e9 t/ N; v4 k! DNew PV3 HD capture card format is now supported through the PV3 Reader. (Requires the AviUtl plug-in EARTH SOFT DV.aui Ver 2.4.4)
# ~! a& t# I! z' }9 V( S( FUpdated The maximum number of B Pictures is now limited to 3 in the Main profile, following the MPEG-4 AVC specifications.
Fixed You can no longer choose an unauthorized framerate for a specified DivX output profile.
: u$ J( R) L$ U. |" K; y3 vFixed An error where the aspect ratio of a 4:3 740x480 WMV source displayed as Other (xx) instead of 4:3 has been fixed.
0 {0 W# g/ J) Q+ xFixed In the subtitles filter editor, an error which occured when pressing the space bar while no text is selected has been fixed.
0 j% i8 N/ U9 _/ k8 O5 QFixed An error which occured when starting the Batch encode tool if QuickTime 7.1.3 is installed has been fixed.
4 P5 Z8 j6 y5 i& l% Z, ^6 R: {Fixed The appearance of the "An error occured while structuring the clip edit window" warning has been fixed.
Fixed An error where the deinterlace filter in "Replication - simple" and "Replication - animation" mode inverts the lowest field has been fixed.
Fixed An error which may have occured during a picture resize has been fixed, and the the amount of memory used has been reduced.
Fixed Depending the display size, the Overlay display mode added a black line around the picture; this has been fixed.
Fixed Outputting a 16:9 source in PNG or JPG sequential pictures with the keep aspect ratio enabled displayed white top and bottom bars instead of black; this has been fixed.
Fixed Abnormal terminations which may have occured when opening a DVR-MS file with the DirectShow file reader have been fixed.
Fixed Outputting a resized DivX or MP4 while keeping the aspect ratio may have resulted in an abnormal aspect ratio and black framing; this has been fixed.
Fixed Using the DivX reader resulted in false aspect ratio values, framerate values, etc. displaying in the Clip properties window; this has been fixed.
# c0 D1 S$ m! v/ _8 J% b/ gFixed MPEG-2A720x480 2.21:1 in the Clip properties window are now correctly recognized.
Fixed DivX file output format non-standard parameters fixes:
--Non-compliant HDTV profile macroblock maximum limit in interlaced and progressive mode has been corrected;
--It is now possible to select an other aspect ratio than 1:1 in Home theatre profile;
--It is now possible to select the bidirectionnal encoding (B frame output) when using a profile with interlaced mode video type;
--It is now possible to select GMC/Quarterpixel search when using a profile;
--You can no longer select a non-compliant audio bitrate;
--A problem with some of the standard audio bitrate value selection has been fixed.
5 t, D( M# A- |5 o- p, e. QFixed Miscellaneous fixes.
+ w" n' ?8 y7 z0 b* _( W
9 y* x' }6 s7 B9 Y1 D; E% ~
4.2.1.188
4 b! X- Z6 S) w& fCompatible with the latest Intel® Core™2 Duo processor

8 m  [6 e. J1 T+ k* |* X) m% p8 Y
- M. ]4 ~( D9 x( y  U  A4.1.0.179 Main feature
7 t. B- n9 y6 ?) n; u• H.264/MPEG-4 ISO (for Mobile Devices) support
# G! C. l# f2 |& w2 R• High Definition Video Support /template
* r7 X. l+ H2 ~( V* F• 19 audio/video filters
* O( P; E1 D6 ~. ^) A/ Y• High Speed Thumbnail Viewing and Scrolling
• Smart Scene Search
/ [- P3 b/ ?( ^) s• MP3 input/output
/ A7 x; f4 |) G• QuickTime output
+ W: P! Z% i0 P+ l3 o• Multi core CPU support
: g, @4 C% K6 `6 ?• SlideShow creations
• DVD Video Subtitle support

* F* o2 p* z$ ^/ C7 vSystem Requirements:
, t8 u4 `3 X6 [$ ]) [) L4 g* PCompatible with Windows 2000, XP, Vista and Win7 (32/64-bit)
& d; u9 F! }: h: |* S" s- PC: IBM PC compatible
/ V, Y1 i" ]( H8 y" A; [" M- OS: Windows2000 (Recommending the use with administrator authority)
WindowsXP (Home, Pro, Media Center), Windows Vista / Vista SP1 / Vista SP2
: H5 Y# q, r/ l# j(Ultimate, Home Premium, Home Basic, Business)
Windows 7 (32-bit / 64-bit versions) (* 64-bit OS support for Windows 7 only.)
- CPU: Pentium3 1GHz, Athlon XP 2000 or better (Providing SSE extension support)
(SSE extended instruction is necessary)
- RAM: 256MB or more
7 e' s! E  ], y/ b7 U! o- HDD space 40MB for the program + enough space for the input / output files
(*NTFS format, 5 GB at least recommended)
- Screen resolution: 1024 × 768 or more
- HDD format: NTFS file system recommendation
- Others: DirectX 9 or more
! C" ]( x2 C' T* {9 G
. z4 F4 W- I- Q! K$ _) R1 DRecommended hardware specifications
; ~% I3 E( t: h, L- OS: Windows Vista, Windows XP (Home, Pro, Media Center)
- CPU: Pentium4 2.4GHz HT technology correspondence or more Athlon 64 3000+
is more. Or CPU above equal efficiency
- K% s4 y1 B. F: R- Memory: 512MB or more
; N$ F& U- i7 Z- b2 v; a- Picture resolution: 1280 x 1024 or more / Full-color output
9 v2 P: y& i" @( p3 H- Others: DirectX 9 or more

! H$ M, W8 e% jRecommended system specifications for HDV editing
- CPU: Pentium4 3GHz or Pentium D 820 or more / Athlon 64 X2 3800+ or more
. q" A/ g  D  X4 w$ a/ C*2 or more CPUs (logical / physical) is recommended.
- Memory: 1GB or more
- Picture resolution: 1600 x 1200 or more

8 w4 |3 _1 G$ T) i2 p
( u2 |5 u7 n0 A5 K$ m* }3 E# K5 Z
# m0 @$ s: x' }Download:
! k7 R: h1 U/ t; JTE4XP_Retail_4.3.1.222_setup_en.exe
TE4XP_Retail_4.4.0.234_setup_en.exe
TE4XP_Retail_4.4.1.237_setup_en.exe
TE4XP_Retail_4.7.1.284_setup_en.exe
TE4XP_Retail_4.7.3.292_setup_en.exe
6 o+ G, B' ?& K! w3 j7 Z+ q7 MTE4XP_Retail_4.7.4.299_setup_en.exe
TE4XP_Retail_4.7.6.304_setup_en.exe
TE4XP_Retail_4.7.7.307_Setup_en.exe
5 ^7 w9 \9 j3 Y: k7 RTE4XP_Retail_4.7.8.309_setup_en.exe

! A$ L! ]6 l) d# A/ d6 [